Most people purchase heat pumps because they have a reputation for jobbing perfectly through both the winters as well as the summers.
More often than not, this Heating, Ventilation plus A/C unit is effective for air conditioning as well as air heating services.
Being a 2-for-1 unit means that it can perform both roles. But what does one do when the cooling function seems to fail? First, you need an appreciation of the numerous things that could trigger the heat pump’s inability to job as an a/c. It is possible that control unit temp settings are all wrong, just as it is with heating troubles. It is possible that when it is on, the current temperature mode could be heat; thus, the pump is blowing warm air inside. Change the setting to coolsville. Next, check the outdoor unit as well as ensure it is running appropriately. Check to see that it is not blowing cold air. If it is, you may want to have the Heating, Ventilation plus A/C contractor check the refrigerant level since the cold is a negative indicator. If the control unit as well as outdoor unit are fine, then check the entire unit for any problems. Potential problems include a tripped circuit breaker or the switch may be turned off. Only check for these troubles if there is no airflow. In case everything checks out, you may also want to proceed to the flyers. Confirm that they are not blocked or blocked. If so, change them out as well as set a reminder to do this officially. Also, check the outdoor coil as well as scrub it in case it is dirty or blocked. Once you address these respected triggers but cannot reverse your issue, it may be time to call for expert services. Always schedule routine repair to ensure everything is running smoothly. Note that the heat pump can job both as a heating system as well as the a/c.